GE Fanuc IC200MDL940 VersaMax 16-Point Relay Output Module
The GE Fanuc IC200MDL940 is a VersaMax relay output module with 16 individually isolated, normally open outputs. It supports specified AC and DC loads and is designed for industrial PLC control and automation systems.
Procurement & Technical Support
- Availability
- Contact us to confirm
- Price:
- US$ 184.60
Need help confirming compatibility or finding an alternative? Contact our team with your requirements.
Description
GE Fanuc IC200MDL940
VersaMax Discrete Relay Output Module | 16 Isolated Outputs | 2 A per Point | AC/DC Switching
Product Detailed Description
The GE Fanuc IC200MDL940 is a VersaMax discrete relay output module designed to switch external AC and DC loads in industrial PLC control systems. It provides 16 individually isolated, normally open Form A relay outputs, allowing a compatible PLC to control contactors, indicator lamps, solenoids, and other electrical devices.The module supports output voltages up to 265 V AC or 125 V DC, with a maximum resistive load rating of 2 A per point for 5–265 V AC and 5–30 V DC. For DC loads from 31–125 V, the maximum current is reduced to 0.2 A per point. Output response time is approximately 10 ms for both ON and OFF transitions. Individual status LEDs indicate output logic state, while the OK and FLD PWR indicators show backplane and field-power status.
Technical Specifications
| Item | Specification |
| Brand | GE Fanuc |
| Model | IC200MDL940 |
| Product Series | VersaMax |
| Product Type | Discrete Relay Output Module |
| Number of Outputs | 16 |
| Output Contact Type | Form A, normally open (NO) |
| Relay Type | Fixed coil, moving armature |
| Contact Material | Silver alloy |
| Output Voltage Range | 0–125 V DC; 0–265 V AC, 47–63 Hz |
| Nominal Output Voltage | 5/24/125 V DC; 120/240 V AC |
| Maximum Load Current | 2 A per point at 5–265 V AC or 5–30 V DC; 0.2 A at 31–125 V DC |
| Minimum Load Current | 10 mA per point |
| Output Response Time | 10 ms maximum, ON and OFF |
| Switching Frequency | 20 cycles per minute, as listed in supplier specifications |
| Backplane Supply | 5 V DC |
| Maximum Backplane Current | 490 mA |
| Output Isolation | Individually isolated outputs |
| Status Indicators | Individual point LEDs, OK LED, FLD PWR LED |
| Operating Temperature | 0°C to +60°C |
| Dimensions (W × H × D) | 110 × 66.8 × 50 mm, excluding carrier and mating connectors |
| Net Weight | Approx. 0.34 kg; confirm against the supplied unit |
| Country of Origin | USA, reported by suppliers; not independently confirmed |
| Product Status | Listed as active by some distributors; verify current manufacturer lifecycle status |
| Replacement Model | No confirmed direct successor identified |
This item is listed for catalogue and inquiry purposes. Availability, condition, revision, warranty coverage, and lead time are confirmed with each quotation.
All items are Distributor Ready-stock Genuine Brand-new Supplying, please inform us if the
Important Application Note
The IC200MDL940 requires a compatible VersaMax carrier base, and the connected loads require an external power source. Observe the different current limits for AC, low-voltage DC, and higher-voltage DC loads. Relay outputs are normally open and have a finite mechanical life; verify load type, switching frequency, and suppression requirements before installation.
Applications
| Industrial Automation & Control | Machinery & Equipment |
| • VersaMax PLC output control | • Packaging machinery |
| • Contactor and relay switching | • Automated assembly equipment |
| • Solenoid valve control | • Conveyor systems |
| • Industrial indicator and alarm circuits | • Material-handling equipment |
| • Distributed I/O installations | • Production-line machinery |
| Power & Electrical Systems | Industrial Applications |
| • AC/DC load switching | • Factory automation |
| • Electrical control cabinet systems | • Process-control equipment |
| • Motor starter control circuits | • Water and wastewater facilities |
| • Industrial signal and load interfaces | • Machine maintenance and repair |
| • Auxiliary electrical equipment control | • Legacy PLC system upgrades |
Additional information
| Warranty : | 12 Month |
|---|---|
| Lead Time : | Ready Stock |
Reviews
There are no reviews yet.