Showing 97–108 of 308 results
The Bently Nevada 126648-01 is a Keyphasor I/O module with external terminations for compatible 3500 machinery protection systems. It interfaces with supported sensor signals used for shaft speed and phase-reference monitoring.
The Bently Nevada 128240-01 is a Proximitor/Seismic I/O module for the 3500 Machinery Protection System. It interfaces with compatible vibration transducers to support machinery condition monitoring and protection.
The Bently Nevada 136188-02 is an Ethernet/serial Modbus I/O module associated with the 3500/92 Communication Gateway. It supports the transfer of machinery monitoring data and system status information to compatible industrial control and supervisory systems.
The Bently Nevada 16710-50 is a 50 ft armored interconnect cable with three shielded 22 AWG conductors. It connects compatible vibration sensors to monitoring equipment in industrial machinery condition-monitoring systems.
The Bently Nevada 16925-30 is a 30-foot interconnect cable assembly for compatible industrial monitoring equipment. Verify the connector configuration and wiring requirements before installation.
The Bently Nevada 330100-90-00 is a 3300 Proximitor Sensor for monitoring shaft vibration and position in rotating machinery. This legacy model has a 9.0 m system-length configuration, with 330180-90-00 listed as its replacement.
The Bently Nevada 330102-00-40-04-01-05 is an 8 mm proximity probe for non-contact shaft vibration and displacement monitoring. It features a 3/8-24 UNF mounting thread, armored cable, and a ClickLoc coaxial connector.
Bently Nevada 330130-075-10-05 is a 7.5 m FluidLoc extension cable for the 3300 XL 8 mm proximity transducer system.
The Bently Nevada 330400-01-05 is an industrial accelerometer with 100 mV/g sensitivity, a 50 g peak range, and a 10 Hz–15 kHz frequency response. It is designed for casing vibration monitoring and condition assessment of critical rotating machinery.
The Bently Nevada 330400-02-05 is a three-wire piezoelectric accelerometer with 100 mV/g sensitivity and a 50 g peak measurement range. It is designed for casing-vibration and gear-mesh monitoring in critical rotating machinery.
The Bently Nevada 3500/53-03-01 is a three-channel electronic overspeed detection system for machinery protection applications. It monitors rotational speed using compatible transducers and supports integration into a 3500 rack with redundant power supplies.
The Bently Nevada 43501-01-00-01 is a low-pressure cable seal with 1/2-14 NPT threads on both sides and a solid grommet. It is designed to seal compatible transducer cable entry points in industrial machinery housings.
