Danfoss KP15 060-124366 Dual Pressure Control
The Danfoss 060-124366 is a KP15 dual pressure switch for refrigeration and air-conditioning systems. It monitors low- and high-side pressure and operates electrical contacts when either pressure reaches its set point
Procurement & Technical Support
- Availability
- Contact us to confirm
- Price:
- US$ 312.00
Need help confirming compatibility or finding an alternative? Contact our team with your requirements.
Description
Danfoss 060-124366
KP15 Dual Pressure Switch | LP Auto Reset | HP Manual Reset
The KP15 combines low-pressure and high-pressure controls in one mechanical switch. Its bellows sensing elements respond to refrigerant pressure and actuate the electrical contact system when the measured pressure reaches the selected limit, helping the refrigeration system control compressor operation.
The low-pressure side offers a −0.2 to 7.5 bar Pe setting range with adjustable differential and automatic reset. The high-pressure side covers 8 to 32 bar Pe with a fixed 4 bar differential and manual maximum reset. The unit uses an SPDT contact arrangement with a low-pressure signal, a 1/4-inch flare pressure connection and a rubber cable gland.
During replacement, match the LP and HP ranges, reset behavior, contact arrangement and pressure connection. In particular, the high-pressure manual reset differs from automatic-reset KP15 variants. Also verify the application against the approved refrigerant list and installation limits; Danfoss notes that this switch does not suit liquid-line applications.
Technical Specifications
| Brand | Danfoss |
|---|---|
| Model | 060-124366 |
| Product Series | KP |
| Product Type | KP15 dual pressure switch |
| Low-Pressure Setting Range | −0.2 to 7.5 bar Pe |
| Low-Pressure Differential | 0.7 to 4.0 bar |
| Low-Pressure Reset | Automatic |
| High-Pressure Setting Range | 8 to 32 bar Pe |
| High-Pressure Differential | 4 bar, fixed |
| High-Pressure Reset | Manual maximum reset |
| Contact Function | SPDT + low-pressure signal |
| Pressure Connection | 1/4-inch flare, male |
| Pressure Sensing Element | Bellows |
| Electrical Connection | Rubber cable gland |
| Enclosure Rating | IP30 / NEMA 1 |
| Ambient Temperature | −40 to +65 °C; up to +80 °C for max. 120 minutes |
| Country of Origin | Not confirmed — verify product label or manufacturer documentation |
| Replacement Model | No confirmed replacement |
This item is listed for catalogue and inquiry purposes. Availability, condition, revision, warranty coverage, and lead time are confirmed with each quotation.
New Surplus: All items are genuine brand-new, distributor ready-stock supplying. Please inform us if you have any inquiry or demand.
Key Features
- Combined low- and high-pressure control in one KP15 unit.
- Automatic reset on the low-pressure side.
- Manual maximum reset on the high-pressure side.
- SPDT contact with low-pressure signal.
- 1/4-inch male flare pressure connection.
Compatibility Notes
- Confirm the system refrigerant and pressure design limits before installation.
- Match the LP and HP reset functions; other KP15 variants may behave differently.
- Verify the electrical contact rating and control-circuit wiring.
- Do not use the switch for liquid-line applications, as Danfoss specifies.
Applications
| Refrigeration Systems | Monitors compressor suction and discharge pressure. |
|---|---|
| Air Conditioning | Provides dual pressure protection in compatible HVAC systems. |
| Compressor Control | Opens or changes the control circuit when pressure reaches the set limits. |
Important Safety and Application Notes
- Isolate electrical power before wiring the switch.
- Recover refrigerant and depressurize the relevant section before removing the pressure connection.
- Use qualified refrigeration personnel and approved pressure fittings.
- Set pressure limits according to the compressor and system manufacturer’s requirements.
Additional information
| Warranty : | 12 Month |
|---|---|
| Lead Time | Ready Stock |






Reviews
There are no reviews yet.